How to Display a Trans Pride Heart Pin on a Jacket

By THESE ARE THINGS® – Enamel Pins • Iron On Patches | Published: 2026-10-28

Category: How-to Guides

Learn where to place a Trans Pride Heart Pin on a jacket for visibility and safety, plus how to attach and care for it without damaging your clothing.

Quick answer

Place your Trans Pride Heart Pin on the left chest or lapel of a jacket for visibility and safety, using a rubber backing or locking pin clutch to keep it secure without damaging the fabric.

Why placement matters

Where you put a pin affects both how it looks and how well it stays put. The left chest area is a classic spot that keeps the pin visible without interfering with movement or getting caught on straps. The lapel works well for collared jackets, but avoid the collar edge itself—it can bend the pin or cause the rubber backing to slip off.

Choosing a secure backing

The Trans Pride Heart Pin comes with a rubber backing. For everyday wear, that's fine. But if your jacket sees heavy use or you toss it in a bag, consider swapping to a locking pin clutch (available at craft stores). Rubber backings can wear out over time and pop off, especially on thick jacket fabric.

How to attach the pin to your jacket

Choose your spot: Pick a flat area like the left chest pocket or lapel. Avoid seams, zippers, or thick folds where the pin might not lie flat. A flat surface prevents the pin from tilting or loosening.
Mark the position lightly: Hold the pin against the fabric and check the look in a mirror. Use a small piece of tape or a fabric marker to mark the center point if needed. This step helps you avoid poking extra holes if you change your mind.
Push the pin through from front to back: Press the pin post straight through the fabric. If the fabric is thick (like denim or wool), use a thimble or gently twist the post to push through without bending it. Bending the post can damage the enamel or make the pin sit crooked.
Secure the backing: Slide the rubber backing onto the post from the inside of the jacket. Push it firmly until it clicks or sits flush against the fabric. If the backing feels loose, replace it with a locking clutch for extra security.
Check and adjust: Flip the jacket right side out and check that the pin sits straight and the backing is fully covered. Tug gently to confirm it's secure. A loose pin can fall off and get lost, especially on windy days or crowded transit.

Product details

Trans Pride Heart Pin: The Trans Pride Heart Pin features a gold base with colored enamel, measures 1 inch tall, and has a rubber backing. Its small size makes it easy to place on most jacket areas without overwhelming the fabric, and the rubber backing allows quick attachment and removal.
Trans Pride Heart Pin