Start with the size, then pick the spot
The I Love Camping Pin is a 1-inch gold pin with colored enamel and a camping-themed design, and it comes with a rubber backing. That one-inch measurement is the most useful planning number you have: it is small enough to sit on a hat or a jacket lapel without crowding nearby details, and small enough that it will not be the loudest thing on a hiking backpack.
So the placement question is less about whether the pin is big enough and more about which surface gives a 1-inch pin a stable, visible home. Trail use and town use pull in different directions, so decide where the pin will actually be worn before you push it through anything.
What the catalog confirms
- I Love Camping Pin: Gold pin with colored enamel detail, camping-themed design, brand These Are Things. The gold finish and enamel color are the visual features you are placing, so choose a background that lets them read clearly.

I Love Camping Pin - I Love Camping Pin: Measures 1 inch and includes a rubber backing. The 1-inch size sets how much room you need, and the rubber backing is the part that holds the pin on the far side of the fabric.
A trail-first placement routine
On a hiking backpack, the pin has to survive movement and contact with straps, layers, and whatever brushes past it. Work through these checkpoints in order.
- Choose a flat, reinforced panel: Look for a small flat section on the pack rather than a curved seam, mesh pocket, or thin strap. A 1-inch pin needs a spot where the fabric sits still against the backing.
- Keep it clear of load-bearing straps: Avoid the shoulder strap path and any spot where a hip belt, compression strap, or haul loop rubs. Friction is the main way a pinned accessory works loose.
- Push through, then seat the rubber backing: The catalog lists a rubber backing, so use it on the inside of the fabric. Press it firmly onto the pin post so the pin sits flush rather than dangling.
- Do a gentle tug test before you leave: Give the pin a light pull with the pack empty. If the fabric around the post puckers or the backing shifts, move to a tighter weave or add a small fabric patch behind the spot.
- Recheck after the first mile: Stop once early in the hike and confirm the backing is still seated. This is a simple habit, not a manufacturer instruction.
Hat placement: small pin, small canvas
A 1-inch enamel pin is a natural fit for a cap or beanie, but hats are curved and often made of thinner fabric than a backpack. Place the pin on a flat panel of the crown rather than across a seam, and keep it away from the adjustable strap or any spot that folds. The rubber backing should sit against the inside of the hat, where it will not press against your head.
If the hat fabric is loose-knit or very thin, the pin may sag or pull. In that case, a jacket or bag is the better home. The catalog does not confirm the pin as waterproof or rust-proof, so treat a hat worn in steady rain as a risk rather than a tested use.
Town wear: jacket, tote, and everyday bag
Off the trail, the same pin can move to a jacket lapel, a canvas tote, or a daypack. Town surfaces are usually gentler, which makes them a good place to start if you are unsure about the pin's fit.
- Jacket lapel or chest: A 1-inch pin sits comfortably on a lapel or above a chest pocket. Keep it clear of zippers and drawcords that could catch the backing.
- Canvas tote: Tote fabric is often sturdy enough for a small pin. Place it on a flat panel rather than near the handle attachment, where stress concentrates.
- Everyday backpack: The same flat-panel rule applies. A pin on a commuter pack gets less abrasion than one on a trail pack, so it is a lower-risk spot.
Trail vs town: matching the spot to the job
- Hiking backpack: Best for visibility and a flat, reinforced panel. Main risk is strap friction and brush contact. Check the backing after the first mile.
- Hat: Best for a compact, classic look. Main risk is thin or curved fabric. Keep it off seams and away from the adjuster.
- Jacket or tote: Best for low-abrasion everyday wear. Main risk is zippers and drawcords catching the backing. Choose a flat panel.
What the record does not settle
The supplied product information confirms the gold finish, colored enamel, camping theme, 1-inch size, and included rubber backing. It does not include care instructions, weather resistance, or guidance on which fabrics are safe for the pin post. That means you should test the pin on a low-stakes surface first, especially on waterproof shells, coated fabrics, or anything you cannot easily replace.
If you plan to wear the pin on a hiking backpack, check the inside of the pack before pushing the post through. A backing that sits against a seam or a padded panel may not seat fully. When in doubt, choose the simpler surface: a flat panel on a tote or jacket is easier to inspect than a curved, layered backpack pocket.
A camping gift pin that travels well
Because the pin is small and comes with its backing, it works as a camping gift pin without needing extra hardware. If you are giving it to someone who hikes, include a note about the first-mile backing check. If they are more of a car-camper or town wearer, suggest the hat or jacket first. The pin's camping theme does the rest.


