How to Apply a Moon Phases Patch Without Wrinkles

By THESE ARE THINGS® – Enamel Pins • Iron On Patches | Published: 2026-11-03

Category: Handleidingen

Learn how to apply a Moon Phases Patch without wrinkles. Follow our step-by-step iron-on method, plus tips for celestial placement and sewing.

Quick answer

To apply a Moon Phases Patch without wrinkles, iron it onto a flat, heat-safe fabric using a pressing cloth and steady pressure, then let it cool completely before moving the garment. For the smoothest result, sew the patch on after ironing.

Why wrinkles happen and how to prevent them

Wrinkles usually come from uneven heat, trapped air, or moving the patch before the adhesive sets. The Moon Phases Patch has an embroidered surface on colored twill, so a pressing cloth helps distribute heat evenly without crushing the embroidery.

Always preheat the fabric and patch for a few seconds before final pressing. This softens the adhesive and lets you smooth out any bumps early.

Choosing the right fabric and placement

The patch works best on sturdy fabrics like denim, canvas, or cotton twill. Avoid stretchy, textured, or heat-sensitive materials such as nylon or vinyl unless you test a hidden area first.

For celestial patch placement, consider the garment's seams and pockets. A common mistake is placing the patch too close to a seam, which makes ironing difficult and can cause the edges to lift.

Step-by-step: ironing a Moon Phases Patch without wrinkles

Prep the fabric and patch: Lay the garment flat on an ironing board and smooth out any creases. Preheat the iron to the fabric's recommended setting (usually medium-high for cotton, high for denim). Place the patch face up where you want it, then cover with a thin pressing cloth. Checkpoint: The fabric must be completely flat; any fold will transfer to the patch.
Tack the patch in place: Press the iron firmly over the pressing cloth for 10 seconds, then lift and check that the patch hasn't shifted. If it moved, reposition while the adhesive is still warm. Mistake to avoid: Skipping this step can cause the patch to slide during final pressing.
Apply steady heat: With the pressing cloth in place, press the iron down firmly and hold for 20–30 seconds. Work in small circles, applying even pressure across the entire patch, especially the edges. Checkpoint: Do not move the iron back and forth like you're ironing a shirt; hold it still to let the adhesive bond.
Flip and press the back: Turn the garment inside out and press the iron over the back of the patch area for another 20–30 seconds. This ensures the adhesive fully melts into the fabric. Mistake to avoid: Ironing the front too long can scorch the embroidery; the back press is safer and more effective.
Cool under weight: Remove the pressing cloth and place a heavy book or flat object over the patch while it cools for 5 minutes. This prevents curling and sets the bond. Checkpoint: Do not lift or test the edges until completely cool.
Reinforce with sewing (optional): For a permanent, wrinkle-free hold, sew around the patch edge with a matching thread using a whipstitch or blanket stitch. This is especially useful for jackets that get heavy wear. Sew-on tip: Use a sharp needle and polyester thread; avoid stitching through the embroidered center.

Product facts

Moon Phases Patch: 3-inch embroidered design on colored twill with heat-seal iron-on backing. The 3-inch size gives a noticeable accent without overwhelming the fabric, and the iron-on backing simplifies attachment.
Moon Phases Patch